All base coats are IS0 9001 approved and conform to BS 5262 Type II, with the exception of High Polymer base coats, which are highly modified specialist products.

50 / BOX

Corner Bead

Provides a straight arris that will not easily crack and reinforces the render where it is most required. The expanded mesh wings of angle bead provide an excellent mechanical key for the render. 45mm wing. Available Galvanised, Novaplas coated or Stainless Steel.
3m long

50 / BOX

Stop Bead

Are used wherever a finished render edge is required. Available Galvanised, Novaplas coated or Stainless steel.
1Omm, 13mm, 16mm and 19mm thick.
3m long

50 / BOX

Bellcast Bead

Designed to create a horizontal finished edge at the junction of render and facing bricks. Available Galvanised, Novaplas coated or Stainless Steel. 16mm.
3m long

15 / BOX

Movement Bead

Offer a solution to the problem of thermal movement in the render. Formed from two stop beads and a duplex pvc extrusion to provide a 6mm movement. There is peel off tape to the face of the pvc extrusion. Available Galvanised, Novaplas coated or Stainless Steel. 1 Omm, 13mm, 16mm and 19mm thick.
3m long

Metal Lath

A sheet of diamond pattern mesh. Produced for render work and provides a high degree of mechanical bonding with render. Nominal mesh size 9mm X 21mm. Nominal weight 1.15 kg/m².
Available Galvanised, Novaplas coated or Stainless Steel.
Sheet size 2440mm X 685mm

Rib Lath

A sheet of herringbone patterned mesh having a profile between the mesh area. It is self furring in that the ribs space the face of the lath away from the supports and background, leaving a void into which the render can penetrate and form a key. Nominal mesh size 9mm X 21mm. Nominal weight 1.15 kg/m².
Available Galvanised, Novaplas coated or Stainless Steel.
Sheet size 2500mm X 600mm

Render Rib

As Rib Lath but only available galvanised. Suitable for external use and has a heavier gauge than Rib lath. Nominal mesh size 9mm X 21mm. Nominal weight 1.78 kg/m².
Sheet size 2500mm X 600mm

Galvanised Products

Galvanised Products: Galvanised beads are designed for internal use and are manufactured to BS6452 Part 1: 1984. Laths are designed for internal use except Render Rib which has a zinc coating of 450gms/m² manufactured to BS 1369 Part 1: 1987. Novaplas products are as the galvanised products and are then powder coated to give high corrosion resistance. They are designed for external use and are ideally suited for modern renders. Stainless steel products offer a higher specification again and are suitable for exterior application and areas subject to possible salt water exposure.

Rendalath is made in 4 different specifications:- Galvanised / Stainless with / without anti-contamination breather membrane. Used in timber or steel frame applications, solid applications and external wall insulation applications. Available in sheet size 2450 X 650mm.

Typical application for timber or steel frame application

Typical application for solid application

Typical application for external wall insulation application

• Timber Frame Structures
• Steel Frame Structures
• Defective Rendering without the need to remove existing rendering
• Solid backing with a painted surface and no suction properties
• Solid backing with contaminated or varied backgrounds
• New build blockwork with very highllow suction properties
• Masonry with suction but no key