Silicone WP and Com-Rend are IS0 9001 approved with Com-Rend also having BBA Certification. Both conform to BS 5262 Type II. All textured finishes are available in both fine and coarse texture grades.
Smooth/Flat Render Our general method for obtaining a smooth or flat render is to use Silicone FT Fine Tex Scratch Render. This can be trowelled and floated and left smooth, although we would always advise that it be textured to remove blemishes and any lime bloom. The preferred option is to apply UF Base Coat to a full render thickness and then to float or scratch this render. Additionally, the fine grading of this material leads to a very fine textured render that is ideally suited for a JUB paint final coat in your desired colour.
Silicone WP - Standard Texture is a coarse scratch render. Applied by hanne over an approved base coat to a thickness of 10-12mm thick and then textured as required, or in 1 coat in 2 passes to a full thickness of 20mm and then textured. The finished render will leave a broken stone open texture with a full through render colour. With the inclusion of silicone and an algae inhibitor, these rwendeers have improved water repellence and resistence to algae growth. These rendrs are available in the full K Rend colour range.
Approx Coverage: 20-24kg/m² approx nominal 16-18mm thickness
1m² per bag as single coat or 1.2m ² per bag over base coat
Silicone FT is a fine scratch render. As above but with a more closed surface textured finish. Coverage as Silicone WP
Approx Coverage: 20-24kg/m² approx nominal 16-18mm thickness
1m² per bag as single coat or 1.2m ² per bag over base coat
Silicone Roughcast - Wet dash 25kg Bag
A traditional wet dash finish is achieved with a fully blended product from the bag with only the addition of clean water required. Incorporating a 6mm limestone aggregate, this render is applied over a coloured receiver coat and an inclusion od silicone eg Silicone Dash Receiver. With the inclusion of silicone and an algae inhibitor, this is a high performance take on the traditional wetdash finish. Available in the complete range of K-Rend colours offering a full through coloured render.
Approx Coverage: 7-12kg/m² nominal 6-9mm thickness approx 2-4m² per bag
A hand or machine applied scratch render. A polymer enhanced render with algae inhibitor, this render provides a cost effective scratch render finish. Available in 8 colours only.
Approx Coverage: 20-24kg/m² approx nominal 16-18mm thickness
0.8m² per bag as single coat or 1m ² per bag over base coat