Silicone WP and Corn-Rend are IS0 9001 approved with Corn-Rend also having BBA Certification. Both conform to BS 5262 Type II. All textured finishes are available in both fine and coarse texture grades.
25Kg Bag
Silicone WP (Standard Texture)
Gives a scraped textured open finish to the finished render through scraping of the surface prior to final set. Can be used as part of a two coat system over a K-Rend base coat, each 10-12mm thick, or as a one coat system over blockwork 16mm thick, possibly in two passes. Has a high water repellent property, reducing algae growth, lime bloom and dirt adhesion.
Approx Coverage 2kg/mm/m² ( 1.3m² / bag @ 10mm )
Approx Coverage 2kg/mm/m² ( 1.3m² / bag @ 10mm )
25Kg Bag
Silicon FT (Fine Textured)
As above but with a more closed surface textured finish. Coverage as silicone WP
25Kg Bag
Com-Rend
As Silicone WP but without the silicone properties of Silicone WF!
Approx Coverage 2kg/mm/m² ( 1.3m² / bag @ 10mm )
Approx Coverage 2kg/mm/m² ( 1.3m² / bag @ 10mm )
K-Rend roughcast is ISO 9001 approved and conforms to BS 5262 Type II.
K-Rend Roughcast finish.
25Kg Bag
Silicone Roughcast (wet dash)
Incorporating a 6mm aggregate into the blended bag. This produces a wet dash mix without the incorporation of any additional materials. High water repellency. High resistance to algae growth, improved dirt resistance and reduced lime bloom. For general use, normally applied to a K-Rend base coat, butter coat of dash receiver then the roughcast finish. The result is a through coloured traditional wet dash finish
Approx Coverage 1.5kg/mm/m² ( 2.0m² per bag )
Approx Coverage 1.5kg/mm/m² ( 2.0m² per bag )