Specialist render finishes and roughcasting - Sundries

Polypropylene Scrim Cloth

Scrim cloth is fully compatible with all K-Rend renders. It is used to strengthen areas of high stress render typically around door and window openings, and over board joints. It is bedded into the previously applied K-Rend base coat, normally HP12 or HPX depending on the substrate, and then trowelled to allow for the full incorporation of the scrim into the wet base coat. It is also used as a reinforcement over previously painted renders with the inclusion of nylon plugs.
Roll Size: 50m x 1m

200 / Box

Hammerset Nylon Plug Fixings DlPK

These fixings are designed for attaching scrim cloth and insulation board material in insulated render systems. Suitable for concrete, solid brick, hollow concrete block, limestone brick, perforated brick, masonry brick and aerated concrete. They are suitable for use with all K-Rend base coats.
DlPK 10/30 with plastic nail - (60mm fixing length with 30mm max board thickness)
DlPK 10/60 with plastic nail - (90mm fixing length with 60mm max board thickness)

25Kg Bag

Cullamix Tyrolean

Tyrolean & Rubbed Tyrolean Finish Is a white or coloured cement based mix, blended with selected fine aggregate and applied with a Tyrolean gun or machine to provide a decorative and protective rendering for exterior or interior surfaces.
Coverage 1kg/mm/m²

25Kg Bag

Alpine White Travertine Finish

Is a white cement based mix containing aggregates that provide a decorative travertine finish.
Coverage 1.52kg/mm/m²

25 litres

K-Rend R7 Liquid Acrylic

R7 Liquid Acrylic is used to improve the adhesion of all renders in areas of high suction, friable and difficult substrates. It is applied by brush or roller after being diluted 1 part R7:4 parts clean water. The render should then be applied to primer whilst tacky.

Public very welcome... We accept all major credit cards